CAS AT7 off-road stone slinger with its hopper and placing conveyor
Photo: Conveyor Application Systems

Stone Slinger Rental in Oregon, Washington and Idaho

Rent the CAS AT7 Off-Road Slinger

Bruce Johnson Construction rents out a CAS AT7 off-road stone slinger for jobs across Oregon, Washington and Idaho. The AT7 throws rock, sand and backfill from a distance, up to 150 feet with its standard distance conveyor. It rides on its own four-wheel-drive chassis, so it can often work where a dump truck or a slinger truck can’t get in.

We’re a third-generation, family-owned excavation company, in business since 1971. We bought the AT7 to use on our own jobs and to rent out to other contractors who need material placed in one exact spot without a crew on shovels.

Check AT7 Slinger Availability
Call or request a quote for stone slinger rental
503-953-6996Request a free quote

How the AT7 Slinger Works

Aerial view of a CAS AT7 slinger placing material into a utility trench
Photo: Conveyor Application Systems

A loader or excavator fills the AT7’s 7-cubic-yard hopper. A heavy-duty 24-inch feed belt moves the material onto the placing conveyor, which throws it in a steady stream to the spot you’re aiming at. The operator drives the machine and controls placement with a wireless remote rated for up to 900 feet, so they can stand wherever they have the clearest view of the work.

Because the AT7 gets loaded on site, it doesn’t need a truck parked next to the placement area. Trucks dump the material at a stockpile on solid ground, the AT7 loads there, and then it drives across the site to the trench, wall or excavation where the material needs to go.

Built for Rough, Hard-to-Reach Sites

The AT7 sits on a 12-foot footprint with selectable four-wheel drive and heavy-duty 14-ply all-terrain tires. It has two-way, four-way and crab steering, plus forward and reverse creep modes for slow, careful positioning. CAS built it to place material in difficult, hard-to-reach areas, such as tight commercial sites and open ground where a loaded truck shouldn’t drive.

Built in Eugene, Oregon

CAS (Conveyor Application Systems) builds the AT7 in Eugene. It runs on a 225-horsepower Cat C7.1 Tier 4 engine with a two-speed hydrostatic drive and a hydraulic leveling system.

CAS AT7 Slinger Specifications

CAS AT7 slinger with a loaded hopper driving up a grassy slope
Photo: Conveyor Application Systems

These are the manufacturer’s ratings. Actual reach and output on your job depend on the material, the conveyor setup and site conditions.

  • Machine type: remote-controlled, four-wheel-drive off-road slinger
  • Footprint: 12 feet
  • Dry weight: 21,000 lbs
  • Engine: Cat C7.1 Tier 4, 225 hp
  • Hopper: 7 cubic yards with extended yardage wings
  • Feed conveyor: 24-inch heavy-duty belt, abrasion and impact resistant
  • Placing distance: up to 150 feet with the standard distance conveyor, or up to 90 feet with the high-volume conveyor
  • Placing rate: up to 3 cubic yards per minute with the standard conveyor, or up to 9 cubic yards per minute with the high-volume conveyor
  • Remote control: OMNEX wireless radio remote for drive and placement, up to 900 feet of range
  • Steering: two-way, four-way and crab steering
  • Tires: 15 x 19.5 inch, 14-ply all-terrain
  • Fuel: 76.5-gallon tank, 6 to 12 gallons per hour

Common Jobs for a Stone Slinger

Underground fiberglass tank set in an excavation before backfill

An off-road slinger is worth bringing in wherever material has to land in one exact place and moving it by loader, wheelbarrow or shovel would be slow, labor-heavy work. Common slinger jobs include:

Trench and Utility Backfill

Place bedding and backfill along utility trenches from the side, without running a loader along the trench edge or shoveling material in by hand.

Underground Tanks and Stormwater Detention

Backfill around fuel tanks, water tanks and underground stormwater detention systems, where the excavation leaves little room for equipment around the tank.

Septic Drain Fields

Throw drain rock into drain field trenches from the edge of the field instead of driving loaded equipment across it. We install residential and commercial septic systems ourselves, so we know how the rock work fits into the rest of the install.

Foundations and Retaining Walls

Place drain rock along foundation footings and behind retaining walls, including spots a truck can’t back up to.

Landscaping and Erosion Control

Spread rock and other landscape material, and place rock for stormwater runoff and erosion control on open ground.

Have material that needs placing?
Call us to talk through your site and schedule the AT7.
503-953-6996

Slinger Truck or Off-Road Slinger?

A slinger truck is a dump truck with a placing conveyor built onto it. It works well when the truck can park on firm ground within reach of the placement area. On a lot of sites it can’t. The ground is soft or uneven, a building or wall is in the way, or the access route is too tight for a loaded truck.

The AT7 splits the hauling from the placing. Trucks drop material on solid ground, the AT7 loads up there, and it covers the last stretch to the work on four-wheel drive.

Planning Your AT7 Rental

Bruce Johnson Construction dump truck unloading rock on a job site

Have these details ready when you call, and we can tell you quickly whether the AT7 is a good fit for the job:

  • Job site location and the dates you need the machine
  • The material you’re placing and roughly how many yards
  • How far it is from the stockpile area to where the material needs to go
  • Site access, including gates, slopes, soft ground and overhead lines
  • Whether it’s a single placement or several days of work

We’ll go over scheduling, transport and rental terms with you.

Contact Us

Why Rent From Bruce Johnson Construction?

We’re excavation contractors first. Bruce Johnson Construction is a third-generation, family-owned business established in 1971, and our crews handle excavation, septic installation, civil and utility work, demolition and land clearing. When you rent the AT7 from us, you’re working with people who do backfill, drainage and site work for a living.

If your project needs more than material placement, we can help with that too. See our excavation services, civil excavation and utility installation, septic tank installation and commercial septic installation.

Stone Slinger Rental Across Oregon, Washington and Idaho

We’re based in Boring, Oregon, southeast of Portland, and we rent the AT7 for projects throughout the Northwest, including:

  • Oregon: the Portland metro area, Willamette Valley, Oregon Coast, and Central, Southern and Eastern Oregon
  • Washington: Southwest Washington, the Puget Sound region, and Central and Eastern Washington
  • Idaho: Boise and the Treasure Valley, North Idaho and Eastern Idaho

Not sure if your site is in range? Call us with the location and dates.

Ready to book the AT7?
Schedule your slinger rental with a member of our team today.
503-953-6996

Bruce Johnson Construction Online 5-Star Reviews

  • “The septic tank was half covered by a concrete sidewalk. Codey sawed out a new exit line, dug a different hole for the new tank, filled the old tank with pea gravel, and kept the aesthetic of the front walkway.”
    Peter B.
  • “He was a pleasure to work with. He delivered on everything he promised. Would recommend this company to anyone!”
    Carl F.
  • “They were prompt, responsive and informative and really knew their [septic tank] product.”
    Angie’s List

FAQ About Stone Slinger Rental

Have a question that isn’t answered here? Call us or request a quote and we’ll help.

Call or get a free quote
for stone slinger rental in Oregon, Washington and Idaho
503-953-6996Request a free quote

What is a stone slinger?

A stone slinger is a machine with a fast placing conveyor that throws rock, sand or other bulk material off the end of the belt, so it lands where you aim it instead of where a truck can tip. Most stone slingers are built onto trucks. The CAS AT7 is an off-road version on its own four-wheel-drive chassis.

How is the AT7 different from a slinger truck?

A slinger truck has to park within reach of the placement area on ground firm enough for a loaded truck. The AT7 has a 12-foot footprint, selectable four-wheel drive and crab steering, so it can leave the pavement, load from a stockpile and place material from a distance: up to 150 feet with the standard distance conveyor.

How far can the AT7 throw material?

CAS rates the AT7 at up to 150 feet with its standard distance conveyor and up to 90 feet with the high-volume conveyor, which trades reach for output of up to 9 cubic yards per minute. Reach on your job depends on the material and site conditions.

What materials can the AT7 place?

Drain rock, crushed rock, gravel, sand and similar bulk backfill. Tell us what you plan to place when you call and we’ll let you know if it’s a good fit.

How big is the AT7, and will it fit on my site?

The AT7 has a 12-foot footprint and weighs about 21,000 pounds dry. Give us the details on gates, slopes, soft ground and overhead lines, and we’ll talk through access with you before you book.

Where do you rent the AT7?

We rent the AT7 for projects throughout Oregon, Washington and Idaho. Bruce Johnson Construction is based in Boring, Oregon, southeast of Portland.

How do I get a quote for an AT7 rental?

Call us at 503-953-6996 or use the quote request form. Have your job location, dates, material and approximate yardage ready so we can answer quickly.

Bruce Johnson Construction Stone Slinger Rental