CAS AT7 off-road stone slinger with its hopper and placing conveyor
Photo: Conveyor Application Systems

Stone Slinger Services in Oregon, Washington and Idaho

Our CAS AT7 Off-Road Slinger, Run by Our Own Operators

Bruce Johnson Construction brings a CAS AT7 off-road stone slinger and a trained operator to jobs across Oregon, Washington and Idaho. The AT7 throws rock, sand and backfill from a distance, up to 150 feet with its standard distance conveyor. It rides on its own four-wheel-drive chassis, so it can often work where a dump truck or a slinger truck can’t get in.

Our operators are trained to run the AT7 at the full capacity it’s rated for, so your job gets the most yards placed per day the machine can deliver. We put it to work on building slab preparation, large excavation backfill, pipe and tank bedding, storm swales and more.

The AT7 is for hire with one of our operators. We don’t rent the machine out on its own. We’re a third-generation, family-owned excavation company, in business since 1971.

Check AT7 Slinger Availability
Call or request a quote for stone slinger services
503-953-6996Request a free quote

How the AT7 Slinger Works

Aerial view of a CAS AT7 slinger placing material into a utility trench
Photo: Conveyor Application Systems

A loader or excavator fills the AT7’s 7-cubic-yard hopper. A heavy-duty 24-inch feed belt moves the material onto the placing conveyor, which throws it in a steady stream to the spot where it needs to go. Our operator drives the machine and controls placement with a wireless remote rated for up to 900 feet, so they can stand wherever they have the clearest view of the work.

Because the AT7 gets loaded on site, it doesn’t need a truck parked next to the placement area. Trucks dump the material at a stockpile on solid ground, the AT7 loads there, and then it drives across the site to the trench, slab or excavation where the material needs to go.

Built for Rough, Hard-to-Reach Sites

The AT7 sits on a 12-foot footprint with selectable four-wheel drive and heavy-duty 14-ply all-terrain tires. It has two-way, four-way and crab steering, plus forward and reverse creep modes for slow, careful positioning. CAS built it to place material in difficult, hard-to-reach areas, such as tight commercial sites and open ground where a loaded truck shouldn’t drive.

Built in Eugene, Oregon

CAS (Conveyor Application Systems) builds the AT7 in Eugene. It runs on a 225-horsepower Cat C7.1 Tier 4 engine with a two-speed hydrostatic drive and a hydraulic leveling system.

CAS AT7 Slinger Specifications

CAS AT7 slinger with a loaded hopper driving up a grassy slope
Photo: Conveyor Application Systems

These are the manufacturer’s ratings. Actual reach and output on your job depend on the material, the conveyor setup and site conditions.

  • Machine type: remote-controlled, four-wheel-drive off-road slinger
  • Footprint: 12 feet
  • Dry weight: 21,000 lbs
  • Engine: Cat C7.1 Tier 4, 225 hp
  • Hopper: 7 cubic yards with extended yardage wings
  • Feed conveyor: 24-inch heavy-duty belt, abrasion and impact resistant
  • Placing distance: up to 150 feet with the standard distance conveyor, or up to 90 feet with the high-volume conveyor
  • Placing rate: up to 3 cubic yards per minute with the standard conveyor, or up to 9 cubic yards per minute with the high-volume conveyor
  • Remote control: OMNEX wireless radio remote for drive and placement, up to 900 feet of range
  • Steering: two-way, four-way and crab steering
  • Tires: 15 x 19.5 inch, 14-ply all-terrain
  • Fuel: 76.5-gallon tank, 6 to 12 gallons per hour

Stone Slinger Jobs We Handle

Two large fiberglass dosing tanks bedded in rock in a deep excavation
Two large dosing tanks set in a deep excavation on one of our commercial septic jobs

We bring in the AT7 wherever material has to land in one exact place and moving it by loader, wheelbarrow or shovel would be slow, labor-heavy work. Our operators are trained on the machine and run it at its full rated capacity on jobs like these:

Building Slab Preparation

Place base rock and gravel across building pads ahead of a slab pour, including pads a loaded truck can’t drive onto once the forms are set.

Large Excavation Backfill

Backfill large, deep excavations around foundations, vaults and underground structures from outside the cut, without running a loader along the edge.

Pipe and Tank Bedding

Place bedding and backfill rock around pipe in utility trenches and around large underground tanks, where the excavation leaves little room for equipment beside the pipe or tank.

Storm Swales

Line storm swales and drainage channels with rock from the side, instead of driving equipment down the channel.

Septic Drain Fields

Throw drain rock into drain field trenches from the edge of the field instead of driving loaded equipment across it. We install residential and commercial septic systems ourselves, so we know how the rock work fits into the rest of the install.

Have material that needs placing?
Call us to talk through your site and schedule the AT7 and an operator.
503-953-6996

Slinger Truck or Off-Road Slinger?

A slinger truck is a dump truck with a placing conveyor built onto it. It works well when the truck can park on firm ground within reach of the placement area. On a lot of sites it can’t. The ground is soft or uneven, a building or wall is in the way, or the access route is too tight for a loaded truck.

The AT7 splits the hauling from the placing. Trucks drop material on solid ground, the AT7 loads up there, and it covers the last stretch to the work on four-wheel drive.

Planning Your Slinger Job

Bruce Johnson Construction dump truck unloading rock on a job site

Have these details ready when you call, and we can tell you quickly whether the AT7 is a good fit for the job:

  • Job site location and the dates you need the slinger on site
  • The material you’re placing and roughly how many yards
  • How far it is from the stockpile area to where the material needs to go
  • Site access, including gates, slopes, soft ground and overhead lines
  • Whether it’s a single placement or several days of work

We’ll go over scheduling, travel to your site and pricing with you.

Contact Us

Why Hire Bruce Johnson Construction?

We’re excavation contractors first. Bruce Johnson Construction is a third-generation, family-owned business established in 1971, and our crews handle excavation, septic installation, civil and utility work, demolition and land clearing. When you hire the AT7 from us, it comes with an operator who does backfill, drainage and site work for a living.

If your project needs more than material placement, we can help with that too. See our excavation services, civil excavation and utility installation, septic tank installation and commercial septic installation.

Stone Slinger Services Across Oregon, Washington and Idaho

We’re based in Boring, Oregon, southeast of Portland, and we bring the AT7 and an operator to projects throughout the Northwest, including:

  • Oregon: the Portland metro area, Willamette Valley, Oregon Coast, and Central, Southern and Eastern Oregon
  • Washington: Southwest Washington, the Puget Sound region, and Central and Eastern Washington
  • Idaho: Boise and the Treasure Valley, North Idaho and Eastern Idaho

Not sure if your site is in range? Call us with the location and dates.

Ready to book the AT7?
Schedule the slinger and an operator with a member of our team today.
503-953-6996

Bruce Johnson Construction Online 5-Star Reviews

  • “The septic tank was half covered by a concrete sidewalk. Codey sawed out a new exit line, dug a different hole for the new tank, filled the old tank with pea gravel, and kept the aesthetic of the front walkway.”
    Peter B.
  • “He was a pleasure to work with. He delivered on everything he promised. Would recommend this company to anyone!”
    Carl F.
  • “They were prompt, responsive and informative and really knew their [septic tank] product.”
    Angie’s List

FAQ About Stone Slinger Services

Have a question that isn’t answered here? Call us or request a quote and we’ll help.

Call or get a free quote
for stone slinger services in Oregon, Washington and Idaho
503-953-6996Request a free quote

What is a stone slinger?

A stone slinger is a machine with a fast placing conveyor that throws rock, sand or other bulk material off the end of the belt, so it lands where you aim it instead of where a truck can tip. Most stone slingers are built onto trucks. The CAS AT7 is an off-road version on its own four-wheel-drive chassis.

How is the AT7 different from a slinger truck?

A slinger truck has to park within reach of the placement area on ground firm enough for a loaded truck. The AT7 has a 12-foot footprint, selectable four-wheel drive and crab steering, so it can leave the pavement, load from a stockpile and place material from a distance: up to 150 feet with the standard distance conveyor.

Can I rent the AT7 without an operator?

No. We don’t rent the AT7 out. It’s for hire only, and one of our own trained operators runs it on every job, at the full capacity the machine is rated for.

How far can the AT7 throw material?

CAS rates the AT7 at up to 150 feet with its standard distance conveyor and up to 90 feet with the high-volume conveyor, which trades reach for output of up to 9 cubic yards per minute. Reach on your job depends on the material and site conditions.

What materials can the AT7 place?

Drain rock, crushed rock, gravel, sand and similar bulk backfill. Tell us what you plan to place when you call and we’ll let you know if it’s a good fit.

How big is the AT7, and will it fit on my site?

The AT7 has a 12-foot footprint and weighs about 21,000 pounds dry. Give us the details on gates, slopes, soft ground and overhead lines, and we’ll talk through access with you before you book.

Where do you work with the AT7?

We bring the AT7 and an operator to projects throughout Oregon, Washington and Idaho. Bruce Johnson Construction is based in Boring, Oregon, southeast of Portland.

How do I get a quote for stone slinger services?

Call us at 503-953-6996 or use the quote request form. Have your job location, dates, material and approximate yardage ready so we can answer quickly.

Bruce Johnson Construction Stone Slinger Services